Home > Manufacturers > SURE Motorsports > Intake Systems >

SURE Full3 Aeros SI for 2.3L MZR DISI (OEM 2" Turbo)
SURE Full3 Aeros SI

Alternative Views:

Our Price: $345.00

Availability:: Ships Immediately
Product Code: SURE0112

Choose Silicone Color*:

Add SURE Element Shield*:

SURE Full3 Aeros SI in Stealth Black: SURE0112-1
SURE Full3 Aeros SI in Ignition Red: SURE0112-2
SURE Full3 Aeros SI in SURE Blue: SURE0112-3
SURE Full3 Aeros SI in Designer White: SURE0112-5

SURE Full3 Aeros SI System

Aeros [air-ose, air-ohs]. The Full3 Aeros System takes the best-selling Aeros and BigMouth then combines them into one 3in system. You heard right, it's a 3in all the way from the MAF housing to the turbo and gives your turbo the most air possible to compress into your engine. More air equals more power.

MAF Sensor Housing
MAF stands for mass air flow, which is a very important sensor that meters air entering your Mazda. The mass air flow sensor housing is a very important part of the intake system. Proper design is crucial for accurate air metering and avoiding the occurrence of a CEL (check engine light). Our AEROS™ MAF housing is machined from 6061 aluminum.

Reusable Filter

The core filtration of our intake system is a 19 millimeter dry filter capable of trapping particles as small as 40 microns. The durable cotton fabric can be cleaned and reused, making the days of frequently replacing filters, history.

SURE Stealth Clamps™

Every Full3 Aeros™ includes five stainless steel SURE Stealth Clamps™ that feature an inner lining that protects the silicone from being damaged by the worm gear during tightening.


The entire MAF housing assembly is put through the anodizing process. This not only makes for an beautiful finish, but more importantly adds corrosion resistance. Anodizing ensures a strong, smooth finish that stands up against corrosion no matter what the driving conditions.


The SURE Full3 Aeros™ is constructed with high performance silicone that is reinforced with 3 layers of nylon and a core wrapped in steel wire. The silicone protects the intake air from engine bay heat.

Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Amazing look/quality/sound September 25, 2014
Reviewer: Nick Nelson from Traverse City, MI United States  
Got this as the first mod for my '07 Speed6 and it was worth every penny. The designer white is by far my personal preference when picking colors for the engine bay, nothing provides a more clean/well maintained look then this color. The sound after you first put it in, to say the least good luck not wanting to drive your car every moment you can from there on out.

I can provide the following 2 pieces of advice:

1. If you care about clean cut, install it with gloves on and have a rag near by as the white obviously shows any grease/dirt/dust you come into contact with.
2. I had to remove part of the battery tray get this thing seated. There was direct interference with the side of the TIP and the battery itself. I believe this was designed for the MS3 which has a different battery tray layout than the speed6 so it doesn't quite fit without some altercations.

Amazing product, amazing quality, and even the box it comes in re-assures you that you got your money's worth!

Was this review helpful to you?