Home > Manufacturers > Cometic Gasket >

Cometic Head Gasket: Protege FS-DE 2.0L
Cometic Head Gasket: Protege FS-DE 2.0L

Alternative Views:

Our Price: $115.00

Product Code: C5844



Mazdaspeed Cometic Head Gasket

Cometic Head Gasket Material: Multi Layer Steel
Thickness: Higher the thickness, the lower the compression

Cometic MLS Gaskets are comprised of three layers of Stainless Steel. Stainless Steel is used for its increased strength, its ability to rebound, and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton), designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The Viton coating is heat resistant to 250 0C or 4820F. The center or shim layer of the gasket is comprised of an uncoated stainless steel layer, which can be varied to accommodate multiple thickness requirements. The Cometic MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks. The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

Available in 84mm (STD) and 84.5mm bore.

Share your knowledge of this product with other customers... Be the first to write a review