Return to SURE Sidewinder Turbo Inlet for 2.3L MZR DISI

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 2

0 of 0 people found the following review helpful:

Great Products-Great Service September 25, 2014 Reviewer: Hayden MacIntyre from Fort Myers, MN United States   I would just like to say I am very impressed with SU's customer service. I recently installed an RMM and a Turbo Inlet Pipe for my Speed3. Every since I installed the TIP I started to hear this "chirp" which sounded like a higher pitched bicycle horn. I kept thinking to myself, this can't be right, and called them up and was wondering what was going on. Luckily I was in the area the next day, Casselbury, and I drove by their store to try and find the solution. We couldn't figure it out at first because I couldn't replicate the sound just by revving the engine, so we took it out for a test drive and as soon as it made the chirp they knew exactly what it was. My Turbosmart bypass-valve was getting so much more air than it was previously that it was making a much louder and distinguished noise compared to the regular whoosh of my SURE CAI. I don't know many places that would go the extra mile to help me like this. Was this review helpful to you?

0 of 0 people found the following review helpful:

love it!!! March 25, 2013 Reviewer: Angel Diaz from orlando, FL United States   installing was a pain in the ass...But after the install it was WOT all the way my only concern was the sound it made every time i shift or left off the throttle. It made this deep toned sound that im not use too idk or just me. Also with the turbosmart dual port made sound different. Idk if anybody was experincing this sound. but other than that great product. Was this review helpful to you?

0 of 0 people found the following review helpful:

Great TIP May 13, 2012 Reviewer: Anthony Monaco from Branchburg, NJ   Like all of the Sure products this is another great part. Actually getting the TIP onto the turbo was a pain because of wires and tubes that were in the way. After installation i can definitely hear the more airflow through the pipe. Was this review helpful to you?

0 of 0 people found the following review helpful:

so much bigger than before (that's what she said) May 6, 2012 Reviewer: John M from Ontario, Canada   when you pull out the stock hard plastic one to replace it with this high quality silicone one, you won't believe how much bigger the Cobb one is than the stocker. A great addition if you have an AccessPort. Only problem is the larger design means it may rub on some engine parts, so keep an eye on wear and leaks, and the barb near the turbo is kind of loose, put a gear clamp on it so it doesn't pull out Was this review helpful to you?

0 of 0 people found the following review helpful:

Almost There May 6, 2012 Reviewer: Nicholas Anderson from Dover, DE United States   While the overall construction is fantastic, the largest concern (pet peave of mine, really) was the actual mating to the turbo. On my Sidewinder, it seems like the inlet side is just a half inch too short to mate entirely flush to the turbo. The Sidewinder was pushing up against the wire harness that is right there directly outboard of the engine, so the aft end of the inlet connection was flush, but not the forward part. But all you have to do is tighten the stealth clamp down properly and you should have any leak issues whatsoever. I'd just double check for any slippage after some nice driving. Either way, it's a great product. I would suggest going with the Bigmouth, though, if you don't have the Aeros. Still, it's a great product all around. Was this review helpful to you?

0 of 0 people found the following review helpful:

TIP December 18, 2011 Reviewer: Mike from SanDiego,Ca   i have it matted to a sure aeros, much better than oem,spooling is louder, excellent craftmanship,do recommend Was this review helpful to you?

1 of 1 people found the following review helpful:

TIP December 10, 2011 Reviewer: Bryan Girkins from Herndon, VA United States   Like everyone said, getting the TIP in was a PITA. Mostly because Mazda has so much crap crammed in there. Plus, there are a thousand different "clips" and "clamps" that are a PITA to pop off. It took awhile just getting the OEM intake, the battery box and OEM TIP off. Also, once the new TIP was on, it took awhile to get it clammed on because of tight angles. But it works great and sounds amazing with the Aeros! Highly recommend! The OEM piece is a POS!!! Was this review helpful to you?

1 of 1 people found the following review helpful:

Very nice product! September 19, 2011 Reviewer: Joey from Sioux Falls, SD United States   This part is a very high quality product. The TiP is very well engineered and fits perfectly on the turbo and comes with great quality clamps to secure the product snug! It is much better than the stock TiP in both quality and effectiveness. I recommend coupling it with the SURE Aeros SRI also. Was this review helpful to you?

0 of 0 people found the following review helpful:

Great product! May 31, 2011 Reviewer: Joseph Peltier from Chisago City, MN United States   Great product, amazing quality like all of SURE's stuff. Was this review helpful to you?

0 of 0 people found the following review helpful:

Airflow May 4, 2011 Reviewer: Matthew from Whittier, NC United States   Defiantly recommend in combination with an intake. Only way to remove all restrictions on airflow to the turbo. Rigid construction. Somewhat tricky install due to the tight location of the turbo. (1 hour, more or less depending on experience of installer) Was this review helpful to you?