Home > Manufacturers > Turbo Wax >

Turbo Wax Swirl Remover
Turbo Wax Swirl Remover


 
Alternative Views:


Our Price: $17.50



Product Code: TWSR16
Qty:

Description
 
TURBO WAX SWIRL REMOVER

Turbo Wax Swirl Remover is one of the most advanced swirl remover products on the market today. Its part of our Professional Body Shop line that we make available to the general public. In just minutes, you can get rid of those ugly swirls and enhance the glossy appearance of your paint finish. Our swirl remover is safe on Carbon Fiber Hoods!
 
Most other swirl removers and swirl mark removers are made to only remove very light swirls and are not effective against moderate swirls. Turbo Wax Swirl Remover is one of the only advanced swirl removers on the market that’s specifically designed to smooth down moderate swirls.
 
Through much research, Turbo Wax has developed a unique formula that when used properly, it quickly removes swirl marks and leaves a clear glossy finish. It contains no silicone’s or fillers. Works great on all painted surfaces and on clear coats!
 
Swirls  Marks are very shallow scratches, it only takes a little blending to level the swirl  marks with the surrounding paint. As an example if you were to used our Turbo Wax Swirl Remover and Final Polish which contains millions of tiny white abrasives that gradually disappear under the friction of the pad.

PRODUCT FEATURES

-Very easy-to-use, and wipes swirls quickly!

-Enhances gloss!

-Do not produce powder residue

-Contains NO Silicone or Fillers!

-Works Great on All Painted Surfaces, and Equally Well on Clear Coats

DIRECTIONS

Use with an air or electric Random Orbital Buffer, preferably with a 3/8 stroke. With electric use a medium to high setting. With air, make sure 90 psi is maintained at the tool when in use.

1. Shake well before using product.

2. Apply product either to surface to be buffed or directly to pad.

3. Buff using a light to medium pressure.

4. Work a 2' x 2' area.

5. Buff until most of product has disappeared, decreasing to light pressure as buffing is finished.

6. Wipe off any excess left with a dry microfiber towel.

    If excess product slings onto adjacent panels or moldings, wipe off with a damp microfiber cloth before going to next panel to be buffed.


Share your knowledge of this product with other customers... Be the first to write a review