Home > Manufacturers > Street Unit Performance > Piping and Hoses >

StreetUnit Silicone Recirculation Tube: MAZDASPEED 6 & 3

SU Recirc Tube
Add color to your engine bay!

Alternative Views:

Our Price: $29.00

Availability:: Ships Immediately


4 Ply Silicone Hose To Replace OEM Recirculation Tube and add color. The recirculation tube is the hose that connects the stock bypass valve back into the intake. This tube can be used for both stock and aftermarket blow off valves running in recirculation mode. This recirculation tube is 13" in length to accommodate all valves on the market. The recirc tube may need to be trimmed to the correct length depending on your valve.

Average Customer Review: Average Customer Review: 3.5 of 5 3.5 of 5 Total Reviews: 4 Write a review.

  1 of 1 people found the following review helpful:
1 of 5 waste of money November 14, 2010
Reviewer: JRob from Orlando, FL United States  
nothing special about these at all. looks like something you could buy from home depot for 1/2 the price. and it would have been nice if they could have atleast cut it to the propper length becuase its a real pain to get that right!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
4 of 5 Tube September 6, 2010
Reviewer: Anonymous Person from omaha, NE United States  
Just like the last guy said, not much to say.
The tube did have to be cut 2.5 inches...

When i got my red, it was in fact glossy...but after an hour of driving, its just a dusted color now in the engine bay.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Fit/Finish for Silicone Recirc tube October 22, 2009
Reviewer: Adam Toy from San Leandro, CA United States  
Well, there isn't much to report as this is bascally a straight tube. I have a TurboXS Hybrid BOV and aside from shortening the tube by 2.5" everything lined up correctly with the BOV and metal turbo intake pipe.

Color? Well, I can't comment on the others, but the RED I ordered wasn't glossy, it looked almost like those red heater hoses you can buy. But it does say 'Silicone" on the stamping, so I have to assume it is.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
4 of 5 It fits June 11, 2009
Reviewer: Frank from Scottsdale,†AZ†United States  
I thought this tube was crap because I couldn't get it on my Cobb inlet without slivers of silicone peeling off. But I tried it again and it fit on pretty well. If you have the Cobb make sure you clamp down the metal piece or it will back up into the tube when you wrestle the re-circ tube on and you don't want that.

Was this review helpful to you?