In April 2000, Japan’s Ministry of Land, Infrastructure and Transport enacted a
low-emissions certification system in order to promote the use of automobiles
with reduced emissions. Under this system, low-viscosity motor oils are
recommended for use in low-emission vehicles (LEVs), which are designed for good
fuel economy and good environmental performance. Since the system’s adoption,
automobile makers have been increasing their production of LEVs, and LEVs are
now marked with the stickers shown below. ENEOS Motor Oil 0W20
is an environmentally friendly gasoline motor oil that provides extremely good
fuel economy. Blended with organic molybdenum friction-reducing additives, this
oil minimizes engine friction and has a very low viscosity of 0W-20
Low Viscosity (0W-20)
ENEOS Motor Oil 0W20 is blended from high-performance hydrorefined base
oils and an optimized additive blend, so it provides much better heat and
oxidation stability than regular motor oils blended from solvent-refined base
oils. Thanks to its innovative formulation, ENEOS Motor Oil 0W20
achieves a low viscosity of 0W-20, so it enables excellent fuel economy and
environmental protection.
Ultralow Fuel Economy to Protect the Environment
In addition to its high-performance hydrorefined base oils and various
additives, ENEOS Motor Oil 0W20 is also blended with organic
molybdenum friction reducers. As a result, the oil minimizes friction and
enables superb fuel economy.
Meets Latest API Standards
The high-performance ENEOS Motor Oil 0W20 has been
certified as meeting the latest API SM standard established by the American
Petroleum Institute.
● APPLICATION
Motor oil for gasoline engines.
● APPLICABLE VEHICLES
Automobiles for which 0W-20 oils are recommended.
Caution: The use of this oil in automobiles designed for
high-viscosity oils can result in inadequate oil circulation, oil leaks, and
other problems.
● CONTAINERS
1USQ bottle
Typical Properties of ENEOS Motor Oil Eco Stage
Quality grade
|
API SM |
SAE viscosity grade |
0W-20 |
Appearance |
Orange |
Density (15°C), g/cm3 |
0.854 |
Flash point (COC), °C |
230 |
Kinematic viscosity |
|
(40°C), mm2/s |
41.5 |
(100°C), mm2/s |
8.5 |
Viscosity index |
199 |
Pour point, °C |
–45.0 |
TAN, mgKOH/g |
2.4 |
TBN (HCl), mgKOH/g |
5.1 |
Color (ASTM) |
L3.5 |
Note: The typical properties may be changed without
notice. (December 2004)