The kit includes 10 pound Co2 tank, cryogenic solenoid valve, all necessary fittings, 14 ft. stainless steel hose, full wide open switch, arming switch, CryO2 Fuel Bar, CryO2 Intercooler Sprayer, CryO2 Intake Air Cooler, and wiring kit.

Only one kit is needed to operate all the CryO2 components.The CryO2 Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a 4" segment of air tube. The air passes over the bulb, heat is removed from the air charge resulting in a colder, denser, more powerful charge. Dyno testing showed a reduction in intake air temperature of more than 50 degrees. The CryO2 Air Intake can be used on turbocharged, supercharged or naturally aspirated applications. Multiple units can be used for colder results. Installs in minutes and comes with silicone connection sleeve, hose clamps and connection / vent hose. The CryO2 Fuel Bar is a billet aluminum extension to the fuel line with a cryogenic chamber. The bar is charged with liquid Co2 and freezes to -80 degrees f. Heat is removed from the fuel as it passes through resulting in a colder fuel charge. The CryO2 Fuel Bar comes in -6AN and -10AN (can be reduced for -8AN) fuel line size. Four cryo-ports allow versatility of installation. Comes complete with vent plug, cryo-port plugs and connection/vent hose. The CryO2 Fuel Bar can be used alone or in conjunction with other CO2 components. It comes either anodized or polished with engraved DEI flame logo. The CryO2 Intercooler Sprayer mounts directly to the front of the intercooler or aftercooler and vents the liquid Co2 directly onto the cooling fins, thus enhancing the performance of the intercooler by more than 50%. This component must always be the last in the CryO2 system as it vents the liquid Co2 charge. The dramatic purge effect that people have come to love is now availiable at a fraction of the cost of other systems on the market. They can be used as a vent to a CryO2 system or as a stand alone show system. Must be used with a CryO2 Tank and Install kit (#080100 or #080102). The purges come in single or dual vents and the supply line can be split multiple times for multiple bursts around the car. You can also use the purge system seperate from the CryO2 performane system buy utilizing the purge kits that includes a solenoid valve and extension hose. This set-up will seperate the performance from the show purge.