TurboSmart Compact Dual Port Blow Off Valve Kit
Application: MAZDASPEED 6, MAZDASPEED 3, & CX-7 (Also Mazda 3 MPS & Mazda 6 MPS)
Part Number:  TS-0205-1010

Color: Black & Silver

Install and Tuning Information on the full size Dual Port Here

Lightweight and compact, the Dual Port bolts directly onto the factory plumbing with no specialized tools needed. Supplied with a “screw-in” blanking plug for easy conversion to a fully recirculating (Plumb Back) or a fully atmospheric (Supersonic) BOV.

Dual Port MPS features sequential recirculating/atmospheric ports for total flexibility, tool-free adjustment via a rotating cap and a 360 degree rotating nipple.

The TurboSmart Dual Port Blow Off Valve  is three BOVs in one. The Dual Port can be configured to vent to the atmosphere (VTA), recirculate into the air intake or BOTH! This blow off valve is also adjustable allowing you to tune the BOV to meet the needs of your car. This is done simply by a turn of the hand. No tools are required to adjust the stiffness of the blow off valve. The recommended setup for TurboSmart Blow Off Valve kit on the MAZDASPEED 6 is the Dual Port option. Using the Dual Port setup, the BOV will recirculate under low boost driving. During high boost situations, the BOV will VTA and recirculate into the intake.

Benefits of the TurboSmart BOV Kit over ALL other BOV kits:

• Recirculates under light boost/normal daily driving conditions

• VTA and recirculates under high boost conditions or compression surge

• BOV spring rate is tunable to the vacuum of your car

• No stalling or backfiring when adjusted properly

• 3 in 1 BOV: VTA in tandem with Recirculation (recommended), 100% Vent to Atmosphere, or 100% Recirculation

• Holds more boost over stock valve

• Increases drivability and responsiveness

• Get the BOV sound of a VTA setup with all the benefits of a recirculation setup

• Recirculation helps maintain proper A/F Ratios

• Gain Top End Horsepower

No other blow off valve kit can do everything that this TurboSmart Blow Off Valve Kit can do! 

    The TurboSmart Blow Off Valve Kit comes complete with everything needed to bolt-up the TurboSmart BOV and run the recommended Dual Port configuration on your Mazda.

The StreetUnit Kit Includes:

• TurboSmart Dual Port Blow Off Valve

• 18" of 3/16" ID Vacuum Tubing (Red, Blue or Black)

• Installation Instructions

For complete discussion and sounds clips of this BOV kit, go to www.StreetUnitForum.com.

***In order to run 100% VTA with this BOV kit, you will need to purchase the VTA Cap Found Here.***