Home > Manufacturers > SURE Motorsports > Engine Components >

SURE TIG™ 1/8" Throttle Body Thermal Insulating Spacer for the 2.3L MZR: Mazdaspeed 3, Mazdaspeed 6, CX-7
SURE TIG™ for the 2.3L MZR Turbo
SURE Throttle Body TIG


 
Our Price: $28.50



Availability:: Ships Immediately
Product Code: SURE0301
Qty:

Description Warranty Info
 
SURE Throttle Body TIG for MZR DISI

On the MZR, the stock metal gasket, found between the aluminum intake plenum and aluminum cylinder head, allows heat to transfer freely between the two components. Lets put a stop to this. With the SURE Motorsports direct replacement Thermal Insulating Gasket, we create a thermal barrier, reducing heat transfer to the intake plenum. The SURE TIG™ will provide your Mazda with lower boosted air temperatures, increasing power.

The SURE TIG™ is designed to fit your specific Mazda application. Cad/Cam designed and produced to have larger ports than the stock gasket which ensures the TIG™ will not restrict air flow. The TIG™ fitment allows for porting options of your throttle body, cylinder head, and intake plenum. The precise fitment guarantees a perfect seal.

We offer the TIG™ in 1/16″ and 1/8″ thickness to suit your specific needs.

Throttle Body TIG™
Our throttle body TIG™ replaces the stock metal gasket found between the throttle body and intake plenum on the 2.3L MZR DISI engine.

Material
The SURE TIG™ is virgin grade PTFE -400°F up to 500°F and is a reusable gasket. The TIG™ is available in 1/16″ and 1/8″ thicknesses.

Hardware
For applications where TIGs are stacked, additional hardware may need to be acquired.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  1 of 1 people found the following review helpful:
 
5 of 5 Great product!! June 11, 2011
Reviewer: Chris Burke from Copperas Cove, TX United States  
I will agree with the said above. Dont do this install unless u know exactly what you are doing or else u could really damage your manifold or block.  I had no clue what I was getting into when I started this small project. Once this was all said and done I have added the intake plenum TIG with this and I promise you I dropped my boosted air temps by 22 degrees. Very well worth the money!!! Great guys at SURE! I must give Wyatt props for helping me through this too!!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Makes a difference May 18, 2011
Reviewer: Jeff from Saint Louis, MO United States  
Very easy mod.  Took the opportunity to also clean the throttle body.  The fit is perfect.  So far I've noticed a drop of 3 to 4 degrees in IATs when cruising.  A good result for a low cost.

Was this review helpful to you?