SURE JUGGERNAUGHT FOR MS6
The OEM mount that bolts to the stock rear differential of the Mazdaspeed 6 is meant to fend off rotational forces of the drive shaft. Unfortunately, the OEM component allows for excessive movement which commonly results in shearing of the stock bolts or cracks in the differential casing. Keeping the rear differential secured on both the X and Y plane is very important. Our Juggernaught™ has been called in to secure the differential.
In addition to the Dreadnaught™, the Juggernaught™ also makes heavy duty an understatement. The Juggernaught™ is designed to be a direct OEM replacement with spot on fitment. In addition to the 3 mounting points of the OEM component, we have added 2 additional mounting points. The additional mounting points, and our solid urethane bushings, create a much more rigid rear end of the Mazdaspeed 6, transferring power down to the asphalt.
The T6-6061aluminum design yields a minimum tensile strength value of 40,000 PSI. The 10.9 grade Torx hardware of the Juggernaught™ is rated at 150,000 PSI. All hardware is finished with high strength threadlocker Loctite.
Solid, and like all SURE products, guaranteed for life.
The Juggernaught™ is CNC machined from T6-6061 aluminum with a 316 stainless steel bolt sleeve that runs through the virgin grade polyurethane. The Juggernaught™ does not cut any corners.
Our grade of polyurethane will stay rigid, keeping the differential in its linear relationship with the drive shaft, while keeping NVH to a minimum. (Stealth Black or Translucent SURE Blue options.)
The Juggernaught™ is anodized in a bright-dip black anodize for a clean, corrosion resistant finish.