Home > Shop by Brands > SURE Motorsports > Engine and Differential Mounts >

SURE Dreadnaught Rear Differential Brace: Mazdaspeed 6
SURE Motorsports Dreadnaught Rear Differential Brace: Mazdaspeed 6
SURE Dreadnaught


 
Our Price: $255.00


Availability:: Ships Immediately
Product Code: SURE0514
Qty:

Description Warranty Info
 
SURE DREADNAUGHT FOR MS6

The Dreadnaught™ is our solution to the dreaded problems caused by the OE rear differential brace in the Mazdaspeed 6. The rear OE differential brace is prone to breaking and allow premature failure of the rear axles.

DESIGN

To be called the Dreadnaught™, heavy duty had to be an understatement. It puts a leash on the rear differential and calls it Sally. NVH (noise, vibration, harshness) is more than acceptable for a daily driven MS6 and may not even be noticeable by some drivers. The precise CAD/CAM designed bracing makes the fitment just like an OE component.

MATERIAL

The Dreadnaught™ is a constructed from solid 6061-T6 aluminum that interlocks within each other. The urethane bolt sleeves are made from stainless steel. The Dreadnaught™ is fastened together with eight 1/2″ Torx bolts and Threadlocker Loctite.

URETHANE

Our track grade polyurethane insures that the brace will stay rigid, keeping the axles in their linear position without increasing NVH (noise, vibration, harshness) into the vehicle cabin.


Average Customer Review: 4.5 of 5 Total Reviews: 10 Write a review.

  0 of 0 people found the following review helpful:
 
BUY THE CPE MOUNT May 25, 2018
Reviewer: Anonymous Person  
Do not buy this mount.  The squared off aluminum at the edges of the mount, towards the front of the car, interfere with the sway bar, so when the car is up in the air, this mount is supporting the weight of the springs via the sway bar.   Buy the CPE unit!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Rear differential rear mount December 8, 2014
Reviewer: Richard McNaughton from Erie, PA United States  
Great packaging. Well worth the money. 4 times as thick as factory mount. Also made of solid aluminium instead of cast like factory. Awesome product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
AWESOME September 16, 2012
Reviewer: Joe from Westminster, CO United States  
I bought the with the Juggernaut, and installed them together. Like everyone says... It is a difficult install (but not unmanageable). I had a lift which made it a bit easier, but still... After the "fun" was over with (total: a lil over 6 hrs.) I took it out and did a full 4000 RPM launch (for the first time since owning the car), and boy... WHOLE new level of love for the MS6. It IS worth every penny. BUY THIS!!!!!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice Part January 14, 2012
Reviewer: Brian Hardy from New Orleans  
OK,
so the dreadnaught is a great part and it really does a great job of keeping the rear diff in check.
The swap itself is a massive PITA!!
If you plan on doing this yourself, find a friend to help you because the diff is very heavy and I highly recommend that you remove the rear sway bar as it is constantly in your way.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
PITA but well worth it!!!! June 26, 2011
Reviewer: Robert Moreno from Fort Benning, GA United States  
So I first attempted to put this thing in when I insalled the R6 Torque mount in my garage using my own jack...FAILURE!!! So I took my car to the local lift shop and got it done in less than 3 hours.  Extensions, pivots and a rubber mallet did the trick.  This piece with the R6 installed is night and day.  Great product and I highly recommend it.

Was this review helpful to you?

View All Customer Reviews