SPC Performance 350Z Front Camber and Caster Kit
Application: Nissan 350Z
Part Number: 72120
Note: 1 kit includes equipment for both right and left wheel.

With these new arms alignment techs can finally tune camber and caster on Nissan's 350Zs.

Popular with tuners, these vehicles currently have no adjustment built in for front camber and caster. SPC Performance's new arm/shim kit is the first on the market that provides a substantial amount of positive camber change. It has more than enough camber and caster change to correct cars that have been lowered, or for vehicles used in drifting. These new arms allow for precise changes when fine tuning suspension alignment angles necessary when racing or drifting.

The hub and caliper shims extend out the center of the wheel making it possible for the forged and fabricated arm to make up to 5 degrees total camber change and ±1.0 degrees of caster change.

Using a sliding and rotating ball joint, techs can fine tune both camber and caster to save tires and improve handling and tire to surface contact. The kit includes everything you need, including the ABS sensor bracket, shims, and arms for both sides of the vehicle.

SPC Performance - your source for alignment products that meet the needs of the sport compact performance market.