MazdaSPEED3
Nviscid Pipe
For those looking to upgrade their inadequate factory plastic turbo
inlet pipe and want the most performance possible, look no further. The
cp-e Nviscid Pipe is without a doubt the optimal solution for both
stock and GT series turbos thanks to its versatility, low-restriction
design, and thermal insulation properties.
Turbos work most effectively when they have no restriction on the inlet
side. The Nviscid Pipe poses the lowest restriction to stock and GT
turbos alike because it offers a tremendous 3-inch cross-sectional flow
area throughout. This is accomplished thanks to the pipe's non-uniform
cross-sectional area, which is made possible by the silicone
construction.
The silicone also doubles as an excellent thermal barrier. Cold air is
denser than hot air, and will ultimately have more power producing
potential. To illustrate just how good silicone is at reflecting heat,
it's about 1000-times better at insulating than aluminum.
The pipes also come with slick details like steel wire re-enforcement to
prevent collapsing under vacuum, it features all stock brackets and
mounting tabs, and also utilizes steel inserts for cold air intake and
bypass valve recirculation attachments. Now you can have a true 3-inch turbo
inlet without all the normally associated headaches.
Both the GT series and stock turbo inlets will fit without any
modifications to the vehicle, and come with all necessary hardware for
installation. |
A MUST have.... 
