Defi DIN-Gauge for Right Hand Drive 

White Gauge Face
Gray Characters
Green Illumination

DIN-Gauge is a 1-DIN sized triple meter for providing information on a pressure and 2 kinds of temperatures. "DIN" is an abbreviation for Deutsche Industrie Normen (German industrial standard) and the most of audio hardwares are designed in the DIN size. DIN-Gauge can be neatly installed in a DIN sized vacant space in your automobile.

• Three guages are fitted into one DIN size.
• The front cover of the gauge has flat face glass.
• Opening and closing mode: The needle pointers of three gauges move sequentially.
• The three meters are angled towards the driver for a higher level of visibility
• Stepping motor:
  • *Maximum angle 270degrees is controlled by the microcomputer up to 4,600 divisions
  • (0.057degrees) to provide high precision in the accuracy of information generated.
  • *Quick response which is sustainable in racing scenes.
• Bright transparent green gauge dials and red instrument needle pointers are used in the gauges to increase visibility at night.
• The lights are produced from super high bright LED lamps.
• DIN-Gauges for right-hand drives and left-hand drives are available.
• This product is for use ONLY on vehicles with a 12V electrical system.

SIZE in mm(inches)
Power supply voltage	DC10 to 15V (Exclusive for 12V vehicle)
Current consumption	+B line MAX 0.5A (Dark current 0mA)
	IGN line MAX 0.5A
	ILM line MAX 0.2A
Operating Temperature	-20 to +60, -4to +140(humidity below 80%)
Storage Temperature	-40 to +80, -40 to +175(humidity below 80%)
Display Range	TEMP.1	30 to 150
	TEMP.2	50 to 150
	PRESSURE	0 to 1,000kPa
Sensor Thread Size	TEMP. sensor	1/8PT
	PRESS. sensor	1/8PT
Gross Weight	1,000g, 2.2lb.(including DIN-Gauge, harnesses, parts, package)
NOTE	*This product is for only on vehicles with a 12V electrical system. Never use this product on 24V vehicles. *Products can not be installed in altered vehicles. *Proper sensor attachments are necessary.