CPE Xcel NANO Short Ram Intake

Home > Manufacturers > CPE (Custom Performance Engineering) > Intake Systems >

CPE Xcel NANO Short Ram Intake: Mazdaspeed 3

CPE Short Ram Intake System

List Price: $210.00
Our Price: $199.50
You Save $10.50!

Product Code: MMS3CXI

Add CPE Pre-Filter:

Qty:

Description

CPE Xcel NANO Short Ram Intake

Representing one of the biggest bang-for-the-buck upgrades, CPE is proud to release the newest addition to their Xcel� product line: The Xcel_NANO�!

�NANO� is a prefix for 10^-9 (one-billionth) or something really, really small. CPE felt this name was fitting because the new intake is a miniaturized version of the popular Xcel� cold air intake. CPE has basically trimmed all of the non-critical elements from the cold air intake.

The Xcel_NANO� is beautiful because it is so elegantly simple. It features the ultra-precise CNC machined aluminum mass air meter housing. The computer controlled machining process ensures that the housings have the same diameter for the most accurate fuel trimming. CPE of course also includes an aluminum stock-style airflow straightener which greatly improves mass air sensor precision.

The Xcel_NANO� comes with all hardware required for a complete and professional looking installation.

Average Customer Review: Based on 19 Reviews. Write a review.

Related Products...

MazdaSPEED3 Nviscid Pipe

Our Price: $199.50
Add

CPE Xcel Cold Air Intake: Acura RDX

Our Price: $283.10
Add

CPE Air Filter Restore Kit

Our Price: $23.00
Add

CPE Xcel NANO Short Ram Intake Mazdaspeed 6

Our Price: $246.05
Add

CPE Xcel NANO Short Ram Intake Mazdaspeed 6

CPE XCel Cold Air Intake

CALL 4 BLOWOUT PRICE: $312.55
Add

0 of 0 people found the following review helpful:

best SRI	January 28, 2010
Reviewer: michael massie from lehigh acres, FL United States

Ive had mine for probably 10,000 miles and I tell u the best intake out there IMO that is. The installation was really easy. Honestly it took me longer to rip the OEM box out then acutely put this in. I Started at 12PM and got to my job by 1 that was 30 minutes away. performance was really good. after the install my car felt free throttle response was alot better. if u want an intake get this. You wont be disappointed

Was this review helpful to you?

0 of 0 people found the following review helpful:

cpe nano intake	December 6, 2009
Reviewer: Julio Torrales from Virginia Beach, VA United States

this intake is the best,,, it really sound like a small jet about to fly no bull****. . 5 stars, no other intake compares to this one.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Grinning all day when on the throttle!	July 20, 2009
Reviewer: Jon from Pittsburgh,�PA�United States

If your thinking about buying this product.. don't be scared. IMO its the best $200 you can spend on your MS3. Don't buy decals and non functional garbage that won't improve performance. Spend those hard earned $$$ on this! It will wake up the inner beast inside your MS3. You'll have hours of fun spooling up & shifting to the symphony orchestra of turbo boost. Subtle when you want it to be, loud when you get on it. You can hear the Factory BPV doing work, and you will love the smile it puts on your face. Few mods are as easy as this especially with the bang for your buck factor. Takes even the most beginner novice, less than 1hr with a few hand tools to deinstall your OEM airbox and install the Nano. If I had any complaints, it would be that my factory PCV hose was a little long to fit properly on the port of the nano and it needed trimmed an inch or persuaded firmly by bending. So if your on the edge about the Nano, do it! Your only regret will be that you didn't do it sooner.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Opens up car	July 4, 2009
Reviewer: Anonymous person from �NJ

Every ms3 owner should ditch their stock box. Old box was out and new one was in within an hour. The factory BOV is finally audible and the gains in the high rpm range allow the car to really accelerate at high speeds.

Was this review helpful to you?

0 of 0 people found the following review helpful:

Don't think about it buy it	July 3, 2009
Reviewer: gabor� from germantown,�MD�United States

I ordered the Cobb Sri like 2 months ago and still didn't recieve it, so I looked into the cpe Sri and decided to go with it. Man am I happy I did quality parts, easy installation, great sound and best yet I found out that there shop is not to far from me. I went down there today and there just the nicest people. I bought the pre filter you know just to be on the safe side. They said they would show me around but they couldn't do it today they had to much going on, told me to call later and they'll show me the shop and machineing processes. So yeah this was my first cpe part but most certanly not the last. So if your thinking about it don't, buy it..... F$&@ Cobb

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Manufacturers > CPE (Custom Performance Engineering) > Intake Systems
MAZDASPEED 3
MAZDASPEED 3 > Intake Systems/Filters
Intake Systems > All Intake Manufacturers > CPE
New Releases!

	Apexi Full Auto Turbo Timer: Silver $113.05
	MAZDASPEED Protege Non-Adjustable Wastegate Actuator $99.00
	H&R Coil-Over Tunable Suspension Kit: MAZDASPEED 6 $1,124.95
	TWM Shifter Base BUSHINGS: MAZDASPEED 3 & Mazda 3 $35.00
	PERRIN Charge Pipe for Stock Air Box: 2002+ WRX & STI Models $79.99
	Motegi Traklite Black 17" x 8" (Unavailable) $1,120.00
	Pauter Forged Rods: MAZDASPEED Protege $799.00
	SSK Forged 7075AL Lug Nut Set (20 PIECE): MOST MAZDA (M12 X P1.5) $99.00